8100 Burnet Road, Austin, TX 78757
8100 Burnet Road, Austin, TX 78757

    Genuine Subaru Brake Pads & Rotors and Cabin Air Filters

    Aftermarket brake parts can be enough to make you shudder!

    Genuine Subaru vs. Aftermarket brake parts: No Contest!

    It’s no secret that aftermarket brake parts cost a little less than Genuine Subaru Brake Parts. But shouldn’t you be considering more than price when considering something as important to your safety? We thought so, so we asked our engineers to compare the quality and performance of Genuine Subaru Brake Parts with aftermarket imitations.

    Make brake system inspection and service part of your maintenance routine, and always insist on Genuine Subaru Brake Parts.

    Start Shopping for Genuine Subaru Brake Pads & Rotors

    Brake Pads

    Also referred to as “shoes”, brake pads are steel-backed plates with friction- creating material bound to the surface. When braking, two pads are pressed against the rotor until the vehicle stops.

    Salt Spray

    The aftermarket brake pads developed significant rust damage after a weeklong salt-spray test. The Genuine Subaru Brake Pads remained rust-free.

    Shear Strength

    This test evaluates the strength of the bond between the layer of friction material and the metallic pad. At both ambient temperature and 300ºC, the Genuine Subaru bond remained far stronger.

    Paint Quality

    Genuine Subaru paint quality is visibly superior, right out of the box.

    Brake Performance

    In a friction performance test at various speeds, Genuine Subaru Brake Pads consistently outperformed the competition. Before and during the heat testing, Genuine Subaru Brake Pads maintained effective braking stability and less anti-fade characteristics than the aftermarket pads.

    Start Shopping for Genuine Subaru Brake Pads & Rotors

    Brake Rotors

    Also referred to as “discs”, brake rotors (and the wheels to which they are attached) are brought to a stop by the friction generated when the brake pads press against them.

    Out-of-the-Box Quality

    What appears to be dirt on the Genuine Subaru Rotor is actually a preservative oil designed to protect it until installation. What appears to be dirt on the aftermarket part is actually rust!


    Brake "shuddering" is the shaking or vibration that can occur when you step on the brake pedal. It's often caused by brake rotor imperfections-both the "plate thickness", and "sideways shaking". Based on the values below, which would you rather have stopping your Subaru?

    • Plate Thickness

      Plate thickness includes the flatness of the rotor's surface as well. The higher the values, the worse the shuddering.

    • Sideways Shaking

      This results from imperfections that do not allow the pad and the rotor to meet properly. Again, the higher the values, the worse the shuddering.


    After a week of continuous driving conditions that included a daily spray of water, the results are clear. The rust-resistant surfaces on the Genuine Subaru protrusion and outside circumference are nearly rust-free. The aftermarket rotor has rust everywhere exccept for the sliding surface-the rust around the bolts actually made it difficult to remove the rotor.